上海419论坛,上海龙凤419,夜上海论坛 - Powered By 上海楼凤资料YqQ

夜上海论坛

Welcome to the official website of Foshan Shunde kangbili Machinery Co., Ltd. we will serve you!
0757-29286216    400-011-1608
home page - News and information -Industry information
Five key points to reduce the amount of film used in flat mounting machine

Publisher: Time: 2022-1-20 11:25:13

(1) Must wait for imprint dry before using veneer machine processing, otherwise it will cause blistering or scuffing.
(2) When facing machine processing, we should also pay attention to the direction of the paper filaments, especially the thick paper, to reduce the curling phenomenon of the paper due to rolling and stretching.
(3) The products to be constructed must be straight, and the uneven paper with lotus leaf edge and tight edge should be treated. The lotus leaf edge can be baked, while the tight edge paper can be hung in the air.

(4) The temperature is generally controlled from 40 ℃ to 60 ℃. Too high temperature will make paper and film deformation, resulting in product curl. But also can not be too low, otherwise it will cause viscosity is not enough.

 Wallboard coating machine

(5) When printing, try not to spray powder, otherwise it will make the powder pile empty and bubble. Before using the veneering machine, the powder spraying should be removed. If the printing quantity is large, it can be hung to remove the powder; if the printing number is small, it can be wiped manually.

Article by: flat paste machine http://canfy.cn Foshan Shunde kangbeili Machinery Co., Ltd. collated and provided, this article does not represent the point of view of this site



copyright © Foshan Shunde kangbili Machinery Co., Ltd., part of the pictures on this website are from the Internet. If copyright issues are involved, please inform the deletion according to the contact information published on the website. technical support:  
top